DHF82 Multi-element fast analyzer

High-precision and high-speed analysis is successfully achieved in a wide range. System analysis of eight elements and eighteen elements were finished in 1994 and 2000 respectively. Furthermore, system analysis of twenty elements was finished in 2002. This analytical instrument is the most advanced both at home and abroad. This instrument has remarkable advantage in the field of silicate system analysis. It is specially suitable for the industries of ceramics, refractory, cement, glass, geology and nonmetal deposits. This analytical instrument has been successfully used by over 100 universities, research institutes and factories. It is well received by the users. Above all, it has been widely sold in overseas market.

Main Technical Parameter

1. Measuring Range

1-1  Measurable Elements and Measuring Range

SiO₂  0.01～100%    Al₂O₃  0.01～100%    Fe₂O₃  0.01～100%     TiO₂   0.01～100%

K₂O  0.01～15%      Na₂O  0.01～15%     CaO  0.01～100%      MgO  0.01～100%

B₂O₃  0.01～30%     ZrO₂  0.01～100%     Li₂O  0.01～15%       SnO  0.01～100%

PbO  0.01～100%     ZnO  0.01～100%     MnO  0.01～100%     Cr₂O₃  0.01～100%

BaO  0.01～10%      NiO  0.01～100%     CoO  0.01～100%      P₂O₅  0.01～30%

1-2  High-speed analysis of principal component of following chemical materials can be carried out by this analytical instrument:

   Chromic salts, V₂O₅ product, MnO product, NiO product, titanium white, phosphate, cobalt oxide, Zinic oxide, boric acid, borax, barium carbonate, sodium silicate.

1-3  High-precision analysis of low-content component

This analytical instrument can extend the measuring lower limit of such elements as Fe₂O₃，TiO₂，K₂O，Na₂O，CaO，MgO，P₂O₅，MnO and Cr₂O₃ to be 0.02%. Analysis precision is better than 0.02%.

2. Analysis Precision

   Analysis precision for each element can reach or be superior to the allowable errors specified in the relevant national standards.

3. Analysis Speed

   Overall analysis of SiO₂，Al₂O₃，Fe₂O₃，TiO₂，K₂O，Na₂O，CaO and MgO can be finished within 2-3 hours from weighing.

   Analysis of other elements can be finished within 4-6 hours.

4. Sample injection channel:  3 channels

5. Number of samples to be measured in succession:  10 samples

Composition of Equipment

1. DHF82 type main unit:     one set

2. Date processing system:    one set

3. Silver crucible:  four sets

4. Ultrasonic washing machine:  one set

5. Standard reserve solution:   one set

Working Condition of Instrument

1. Power Supply:         220V, 50Hz

2. Power of Whole Unit:   1KW

3. Weight of Whole Unit:   100Kg

4. Installation Dimension:  3500×850mm (working desk)

5. Ambient Temperature:   5-30℃

6. Relative Humidity:      ≤85%