24 holes dry type Pressure Blowing Concentrator

Through the microcomputer control technology, using high purity aluminum material as heating medium, to make temperature control more accurate and temperature range wide. The working principle is that blowing nitrogen into the surface of heating samples, making the solvent in the sample fast evaporated, separated, so as to achieve anaerobic concentration in samples, keeping the sample pure.

Main features:

1.Blowing needle are independent of each other, avoiding to cause cross contamination.

2.Air cavity height can be adjusted, the length of standard gas needle is 150 mm.

3.There are 24 airway control switches in blowing nitrogen, not wasting gases.

4.When concentrate toxic solvent, the whole system can be placed in fume hoods.

5. Built-in over temperature protection device, automatic fault detection and alarm function.

6.LED display, temperature display synchronously, time display digressively, easy to operate.

Technical Parameters:

Order No:NBC100-2

Temperature range: Room temperature + 5 ℃ ~ 150 ℃

Timing range: Up to 99 hours 59 minutes

Temperature accuracy ≤ ± 0.5 ℃

Display Accuracy: ± 0.1 ℃

Temperature uniformity@ 100 ℃≤ ± 0.5 ℃

Temperature uniformity@ 150 ℃≤ ± 1 ℃

Heating time (40 ~ 150 ℃) ≤30min

The maximum lifting stroke: 200mm

Standard module: 2 pieces of MK05

Maximum gas pressure:

0.02MPA (Applicable to tube diameter ≤16pcs)

0.05MPA (Applicable to tube diameter> 16pcs)

Maximum gas flow rate:15L / min

Gas needle length:

150mm (applicable tube diameter ≥Φ10mm)

80mm (Applicable tube diameter <Φ10mm)

The number of modules: 2 pieces

Heating power: 300W

Fuses: 250V 3A Φ5 * 20

Dimensions: 280mm * 240mm * 500mm

Weight:7.5KG

Optional modules